Residential coolrooms · Perth and WA
Residential coolrooms. Perth and Rockingham.
Coolroom and freezer panel supplied and installed across Rockingham, Perth and regional WA. Footage shows a commercial coolroom installation.
Built locally. Made to last.
Coolroom supply, installation and repair.
We supply and install insulated panel coolrooms and freezer rooms in Perth and regional WA, from our base in Rockingham. Local south-metro work comes first.
Tell us whether you need a new room or work on an existing panel room. Send the dimensions, required temperature and any plans or panel specification. These details help us confirm the panel type and thickness.
The footage on this page shows our commercial coolroom work; it is not a residential coolroom project.
Coolroom or freezer?
EPS-FR is the panel we use most for coolrooms. Bondor recommends at least 100 mm BondorPanel® EPS-FR for chillers, depending on structural considerations.
PIR is used for freezers and cold stores. For BondorPanel® EPS-FR, Bondor recommends at least 150 mm for freezers and 200 mm for blast freezers, depending on the structure.
Source: BondorPanel® thickness recommendations ↗Panel options for your room.
R-values are each maker’s declared figure for a 100 mm panel at 23°C.
EPS panel
An EPS panel is a sandwich: COLORBOND® steel skins either side of an EPS-FR core (expanded polystyrene with fire retardant). It's a versatile wall and ceiling panel and our go-to for coolrooms, sheds and granny flats.
- 0.6 mm COLORBOND® pre-painted steel skins
- EPS-FR core, 50 to 250 mm thick
- R2.40 for a 100 mm panel (declared at 23°C)
- Lengths up to 16 m (check availability)
- BAL-40 (all exposed core flashed)
PIR panel
A PIR panel has a polyisocyanurate core: a rigid, high-strength thermoset foam. It packs a lot of insulation into a thin panel, which is why we use it for freezers and cold stores. In a fire, PIR forms a protective char layer.
- 0.5 or 0.6 mm pre-painted steel skins, or 0.55 mm 316 stainless
- 50 to 200 mm thick
- R4.45 for a 100 mm panel (declared at 23°C)
- Lengths up to 23 m (check availability)
- FM Approved 4880 and 4881
Sources: Bondor MetecnoPanel® PIR technical data sheet v61 and bondor.com.au/pir
If the specification calls for fire-rated panel, see the XFLAM and mineral wool options in our panel guide.
Installing your room.
01 / Check the site.
We check access, the work area, slab and drawings before the room is set out.
02 / Prepare the panels.
Deliveries are checked for damage and dimensions confirmed before cutting and fixing.
03 / Install walls and ceilings.
Panels are lifted into position, joined and secured, with ceiling support or suspension where required.
04 / Fit the finishing details.
Trims, flashings, sealants, doors and hardware are fitted to the room.
05 / Check the finished work.
The crew tests door operation, checks panel security and collects offcuts and waste.
Questions about your project.
Can you work on an existing coolroom?
Yes. Our coolroom service includes panel supply, installation and repair. Send photos of the room and describe the work needed.
Coolroom installation and repair ↗What should I send with my enquiry?
Include the project location, room dimensions, intended temperature and any drawings. If a builder, engineer or insurer has supplied a panel specification, include that too.
What if the room needs fire-rated panel?
Send the required specification so the wall and ceiling system can be discussed. The panel guide includes XFLAM and mineral wool options with manufacturer sources.
Panel types and suppliers ↗Where can I see your coolroom work?
Our commercial pages show installed panel rooms and work in progress. They can help you see panel joints, ceilings and doors before discussing your own room.
Commercial coolroom projects ↗All project photos ↗